Stainless Steel, 15-5ph
15-5PH stainless steel is a Cr-Ni-Cu precipitation hardenable Steel, which has good strength and corrosion resistance. The material grade can be used in the Solution Treated condition or heat-treated for various applications such as Aerospace Components, fabricated parts in high-pressure corrosive environments including valves, shafts, Landing Gear Equipment, fasteners, fittings and gears. These products are typically used in temperatures up to 600˚F (316˚C) with good ductility and strength.
| Chemical Composition (Weight %) |
|||||||||||||||||
| C | Mn | Si | P | S | Cr | Ni | Mo | Cu | |||||||||
| Min | 14.00 | 3.50 | 2.50 | ||||||||||||||
| Max | 0.07 | 1.00 | 1.00 | 0.03 | 0.015 | 15.50 | 5.50 | 4.50 | 0.50 | ||||||||
| Typical Mechanical Properties (Min) | ||||||||||
| Condition | Tensile Strength, KSI | Yield Strength 0.2%, KSI | Elongation % | Reduction of Area % | Hardness HRC | |||||
| H900 | 190 | 170 | 10 | 35 | ||||||
| H925 | 170 | 155 | 10 | 38 | ||||||
| H1025 | 155 | 145 | 12 | 45 | ||||||
| H1075 | 145 | 162 | 13 | 45 | ||||||
| H1100 | 140 | 115 | 14 | 45 | ||||||
| H1150 | 135 | 105 | 16 | 50 | ||||||
Related Specifications and Conditions
UNS S15500, ASTM A564 Type XM-12, AMS5659, AMS5862, AMS5826, ASTM A693, ASTM A484, E7CNU15.05, 1.4545
Available Forms
Round bar, flat bar, sheet, plate, strip, wire, forgings
| Chemical Composition (Weight %) |
||||||||
| Min | Max | |||||||
| C | 0.07 | |||||||
| Mn | 1.00 | |||||||
| Si | 1.00 | |||||||
| P | 0.03 | |||||||
| S | 0.015 | |||||||
| Cr | 14.00 | 15.50 | ||||||
| Ni | 3.50 | 5.50 | ||||||
| Mo | 2.50 | 4.50 | ||||||
| Cu | 0.50 | |||||||
| Typical Mechanical Properties (Min) | |||||||
| Condition H900 | |||||||
| Tensile Strength, KSI | 190 | ||||||
| Yield Strength 0.2%, KSI | 170 | ||||||
| Elongation % | 10 | ||||||
| Reduction of Area % | 35 | ||||||
| Hardness HRC | |||||||
| H925 | |||||||
| Tensile Strength, KSI | 170 | ||||||
| Yield Strength 0.2%, KSI | 155 | ||||||
| Elongation % | 10 | ||||||
| Reduction of Area % | 38 | ||||||
| Hardness HRC | |||||||
| H1025 | |||||||
| Tensile Strength, KSI | 155 | ||||||
| Yield Strength 0.2%, KSI | 145 | ||||||
| Elongation % | 12 | ||||||
| Reduction of Area % | 45 | ||||||
| Hardness HRC | |||||||
| H1075 | |||||||
| Tensile Strength, KSI | 145 | ||||||
| Yield Strength 0.2%, KSI | 125 | ||||||
| Elongation % | 13 | ||||||
| Reduction of Area % | 45 | ||||||
| Hardness HRC | |||||||
| H1100 | |||||||
| Tensile Strength, KSI | 140 | ||||||
| Yield Strength 0.2%, KSI | 115 | ||||||
| Elongation % | 14 | ||||||
| Reduction of Area % | 45 | ||||||
| Hardness HRC | |||||||
| H1150 | |||||||
| Tensile Strength, KSI | 135 | ||||||
| Yield Strength 0.2%, KSI | 105 | ||||||
| Elongation % | 16 | ||||||
| Reduction of Area % | 50 | ||||||
| Hardness HRC | |||||||
Related Specifications and Conditions
UNS S15500, ASTM A564 Type XM-12, AMS5659, AMS5862, AMS5826, ASTM A693, ASTM A484, E7CNU15.05, 1.4545
Available Forms
Round bar, flat bar, sheet, plate, strip, wire, forgings