Titanium, Grade 2
Commercially Pure Grade 2 is slightly stronger than Grade 1 but equally corrosion resistant against most applications. This grade is one of the most common Titanium Grades and is used for Airframe Components, Heat Exchangers, Condenser Tubing & Medical equipment.
| Chemical Composition (Weight %) |
|||||||||||||||||
| Al | V | Fe | O | C | N | H | Ti | Other each | Other total | ||||||||
| Min | |||||||||||||||||
| Max | 0.30 | 0.25 | 0.08 | 0.03 | 0.015 | Bal | 0.1 | 0.4 | |||||||||
| Typical Mechanical Properties (Min) | ||||||||||
| Form | Tensile Strength, KSI | Yield Strength 0.2%, KSI | Elongation % | Reduction of Area % | ||||||
| Bar | 345 | 275 | 20 | 30 | ||||||
| Sheet, Plate | 345 | 275 | 20 | 30 | ||||||
| Tube | 345 | 275 | 20 | 30 | ||||||
Related Specifications
BS2 TA2, BS3 TA3, DTD 5073, ASTM B265, ASTM B338, ASTM B348, 3.7034, 3.7035, AIR 9182 T40
Available Forms
Round bar, flat bar, sheet, plate, strip, wire, forgings, tubes
| Chemical Composition (Weight %) |
||||||||
| Min | Max | |||||||
| Al | ||||||||
| V | ||||||||
| Fe | 0.30 | |||||||
| O | 0.25 | |||||||
| C | 0.08 | |||||||
| N | 0.03 | |||||||
| H | 0.015 | |||||||
| Ti | Bal | |||||||
| Other each | 0.1 | |||||||
| Other total | 0.4 | |||||||
| Typical Mechanical Properties (Min) | |||||||
| Bar | |||||||
| Tensile Strength, KSI | 345 | ||||||
| Yield Strength 0.2%, KSI | 275 | ||||||
| Elongation % | 20 | ||||||
| Reduction of Area % | 30 | ||||||
| Sheet, plate | |||||||
| Tensile Strength, KSI | 345 | ||||||
| Yield Strength 0.2%, KSI | 275 | ||||||
| Elongation % | 20 | ||||||
| Reduction of Area % | 30 | ||||||
| Tube | |||||||
| Tensile Strength, KSI | 345 | ||||||
| Yield Strength 0.2%, KSI | 275 | ||||||
| Elongation % | 20 | ||||||
| Reduction of Area % | 30 | ||||||
Related Specifications
BS2 TA2, BS3 TA3, DTD 5073, ASTM B265, ASTM B338, ASTM B348, 3.7034, 3.7035, AIR 9182 T40
Available Forms
Round bar, flat bar, sheet, plate, strip, wire, forgings, tubes